Français
Both sensors have a very low spawn rate, but can resist wind gusts of up to 75 m / s, even at temperatures extremely low. They require very little maintenance and will stay in their specifications for many years. To install the sensors in accordance with WMO requirements, the assembly includes a 80 cm wide mast mount.
Each sensor is delivered with its own cable. This allows the individual replacement of sensors in the event of maintenance.
Anemometer Pro 10
SENSEURPro10 is a set of two separate wind speed and direction sensors very precise, it is also extremely robust, completely in aluminum anodized, without plastic parts.
| Anemometer: Measuring principle | Magnetic |
|---|---|
| MEASURING ELEMENT | 3-ARM CUP ANEMOMETER |
| MEASUREMENT RANGE | < 0.4 M/S:::75M/S, SPEEDS UP TO 270 KM/H |
| PRECISION | <± 0,3 M/S |
| OPERATING ENVIRONMENT | -40°C / +75°C; 0 / 100% RH |
| WIND VALVE, MEASUREMENT PRINCIPLE | POTENTIOMETER |
| MEASURING RANGE | 0 – 360° |
| START-UP SPEED | 0.4 M/S (1.44 KM/H) |
| BLIND SPOT | 3° ± 1° |
| ENVIRONNEMENT OPÉRATIONNELLE | -40°C / +75°C ; 0 / 100% HR |
| OUTPUT SIGNAL | 0 … 2.5V DC |
| COLLIER | IN STAINLESS STEEL, 32-50MM |
| MATERIAL | SEAWATER RESISTANT ALUMINUM |
| SUPPORT | FOR THE FIXED POLE DIAM. 40MM |
| CONNECTOR | 5PIN WATERPROOF |
